All The Information You Need On Wireless Routers
Like any other wireless system, a wireless router gives you freedom to free the valuable workspace from the tangling wires. Technically speaking, a wireless router is a special network router that connects different workstations wirelessly and routes network traffic between workstations and an existing Internet connection.
Some of these routers are actually wired routers with wireless access points built in so you can have wired and/or wireless at the same time. Another choice is a router with a built-in DSL or cable modem. You can also consider a hardware & software security combo box to connect and protect your home network or office network. The wireless device is capable of sharing Internet connections amongst several computers via 802.3 Ethernet and 802.11b/g wireless data links.
These routers are quite popular among the network users. Moreover it is as good as using the wired networks with absolutely no compromise on the connectivity, speed, and security. A wireless LAN router generally adds a built-in access point function to a multi-port Ethernet router.
With this it combines multiple Ethernet networks with wireless connections as well. A typical wireless LAN router includes four Ethernet ports, an 802.11 access point, and sometimes a parallel port so it can function as a print server. This gives wireless users the same ability as wired users to send and receive packets over multiple networks.
There are many manufacturers of these wireless devices, popular of them are D-Link, Netgear, Actiontec etc. Out of these, the D-Link routers is what we find is the popular product amongst the home and commercial users. These routers have an uncanny ability that delivers superior performance capability to transfer large files and handle heavy network traffic.
Most of these routers offer many important benefits in the home and small office setting. For instance, you can opt to a cable modem service that provides a single IP address through DHCP to the router, and the router then provides IP addresses via DHCP to clients on your local network. This helps to a great deal whenever that client needs to access the Internet.
Routers are very much ideal for wireless networks in commercial or public areas, especially if there are multiple networks that are accessible. These routers if considered in an enterprise environment give network administrators an extra way to monitor and update their networks.
As these routers only send packets to specific, directed addresses, they do not forward the broadcast packets that are sent out by other devices. A big advantage of such routers is that they provide an added layer of security, both on the wired side and wireless side. The wired side is usually protected by a firewall and has extensive access control filters.
That is why, not only the wireless routers are more user friendly and space saving, they are also great on speed, and have an ability to handle multiple networks with ease and without sacrificing the security.
June 25th, 2010 at 5:16 am
ADSL is "Asymmetrical Digital Subscriber Loop" and works up to 18,500 cable feet (less than 3 miles as the crow flies) from the serving equipment. The speed falls of rather quickly the further away you get. DSL is offered on a 'best effort' basis, no speed guarantees, no up time guarantee. Putting DSL into an area is only economically viable if hundreds of people get on it. Asymmetrical means your send speed is a fraction of your receive speed.
T1 has a guaranteed uptime and guaranteed speed. It can use a repeatered line and reach several miles from the serving office with no loss of speed. Speed is equal both ways. It cost more to provide this service, hence the providers must charge more.
ADSL and T1 run on the existing copper that has been in place for decades. FIOS, T3, DS3 run on fiber, which costs a lot of money to run out to a neighborhood (many thousands of dollars per mile) thus requiring a lot of money in return to make it economically viable.
No one, including the Government, is going to lose money just to provide you with high speed service. Without a profit a company will soon be out of business. You have to pay more than the cost of providing the service.
As for providing wireless service to your neighbors. The radio signal strength falls off rapidly with distance. A typical WiFi is usable at most a few hundred feet. If your neighbors are more than a stone's throw awa you will need about $100 per customer for WiFi access points and high gain directional antennas.
Your best deal for High Speed Internet is to move to town.
Second best would be Satellite.
You want the country life, you get the country life.
…………………..
June 25th, 2010 at 5:44 amThat Wiki article is mostly correct. T1 spans could be powered with 260vdc (+/- 130v) and the DSX bay is a new-fangled thang that came in as I was going out.
@salemsaberghaguem yeah what is the diffrence
June 25th, 2010 at 5:49 amin flashfxp it keeps saying connection lost plz help
June 25th, 2010 at 6:17 amTo can check/determine whether there is built-in wireless on your Dell Latitude D600, you need to go to the Control Panel and open Network Connections and you will see WIRELESS NEWORK CONNECTION: It will show whether your Dell D600 has a WiFi card and if so then you can also click on it for repair, properties etc. Otherwise I recommend you go out and buy a USB WiFi device (N is the best) as they have most versatility and you will be able to take it along with you if you decide to sell or give the Dell D600 away.
Hope the Above Info Helps!
June 25th, 2010 at 10:47 amDoes it works with laptop?
June 25th, 2010 at 1:28 pmPlease proceed as follow:
Reboot router by application upper bottom.
If that doesn’t do the trick
Reboot it again by unplugging power supply cord
Not results it means the router is not hand-shaking with your service provider.
Then proceed with the following:
-Shut down or disconnect from the router all your machine on your LAN
-Disconnect router Power supply cord
-Disconnect Modem power supply cord
Wait 3 minutes and start connecting devices back as follow:
Power up modem, wait for the Power, Send , Receive, Status (cable) or other signal light (LEDs) to
Finishing blinking ( I would give it 2-3 minutes).
Power up router and wait one minute
Start connecting the rest of the devices one by one and verified they get connection to WWW.
Give priority to your main machine and If you have any weather or VoIP devices connecting to the network
Connect those after you verified you LAN computers are connected
If not results please give details of devices , service provider type (cable or DSL) OS version
Good Luck
June 25th, 2010 at 3:49 pmJune 25th, 2010 at 11:22 pm
@salemsaberghaguem same here please tell the diference just to not be fooled when we buy one.
June 26th, 2010 at 1:43 amJune 26th, 2010 at 5:58 pm
Routers in my view are like most other thing's, you get what you pay for.
For instance I recently got a wireless usb dongle for my PC and there were two different types of belkin one's. One was £10 more expensive than the other yet it offered better speeds so as I spend alot of time gaming I chose the better one with more speed so that my network works at a optimal performance.
If you want a wireless router for just browsing the net and reading mails etc then a cheaper router should be fine however if you enjoy gaming, media streaming i.e. internet radio, youtube etc then I would suggest looking at the higher end model's.
Belkin routers seem to be very good. I have a Belkin usb dongle at home and my girlfriend has a belkin wireless router at her home and they both have been problem free, easy setup and network reliable.
Here is a low-end Belkin router in $
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=136493 – $39.99 usd
Here is higher-end Belkin (similar to gilfriends one) in $
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=203415 – $99.99 usd
If someone could confirm these two models being good for use as stated please do or even better come up with a better suggestin for the poster.
June 27th, 2010 at 12:51 amAAwwh thnx dude! This helped me dam much!
June 27th, 2010 at 8:00 amI find the solution, Ufff, from yesterday i was question in web pages, but here in youtube i find the solution, thanks man, thanks
June 27th, 2010 at 7:50 pmYes! It should work fine! U just need the application
June 27th, 2010 at 8:28 pmI have a modd xbox evox i want to put on emulators do i just use a Ethernet crossover cable with flash fxp ?
June 28th, 2010 at 12:20 amYou will need to check with the ISP for the settings. All the possible protocol changes can be required by some. The terms used in the setup are described in the manual, idle timeout could mean the period it waits when you are not using it before it disconnects, which should be turned off totally.
June 28th, 2010 at 1:16 amhmthank but what is the diferent between a cross over clabe and a normal net cable
June 28th, 2010 at 6:21 amBroken, in regards to losing your linksys security configuration. The first step I would take is to change the routers admin password. Someone might have gotten your password and is going in and turning off security or resetting the router so that they can connect to your WiFi connection. The linksys SSID is also the factory default setting, so it is most likely that this is happening because of a issue with the router. If you have had the linksys router a long time it might be time for a replacement. I have seen getting a new router fixing issue like the one you are having with the USB, especially if you just got the USB and its an old router.
June 28th, 2010 at 11:12 am